Η συλλογή αποτελείται από 8 πρότυπα αναφερόμενα στο κείμενου του Προεδρικού Διατάγματος 41/2018 (ΦΕΚ Α' 80 - 07/05/2018) σχετικά με κανόνες ασφάλειας, δοκιμές αντίστασης υλικών στη φωτιά και φωτισμούς ασφαλείας

The collection consists of 8 standards referred to the text of Presidential Decree 41/2018 (Government Gazette A' 80 - 07/05/2018) regarding safety rules, fire resistance tests of materials and security lighting.

Κανονισμός Πυροπροστασίας Κτιρίων – Πρότυπα αναφερόμενα στο ΠΔ 41/2018

ΕΛΟΤ EN 81-72 Ε3

1.1	This document specifies the additional or deviating requirements to EN 81-20:2020 for new passenger and goods passenger lifts, which can be used for firefighting and evacuation purposes under firefighters control.
1.2	This document applies, when the following conditions are fulfilled:
-	the lift well and the lift environment are designed to restrict the ingress of fire, heat and smoke to the lift well, machinery spaces and safe areas;
-	the building design limits the flow of water into the lift well;
-	the firefighters lift is not used as an escape route;
-	the lift well and the lift environment are fire protected for at least to the same level as the building structure;
-	the power supply is secure and reliable;
-	the electrical cable(s) providing power to the lift is fire protected to the same fire protection level as given to the lift well structure;
-	a suitable maintenance and verification plan is implemented.
1.3	This document does not cover:
-	the use of lifts with partially enclosed wells for use as firefighters lifts;
-	lifts installed in new or existing buildings, which are not included in fire resisting building structure;
-	important modification to existing lifts.
1.4	This document does not define:
-	the number of firefighters lifts and the floors to be served during firefighting operations;
-	size of safe area(s);
-	the use of other than the highest deck of a multi deck lift for firefighting operations.
1.5	This document deals with the significant hazards, hazardous situations and events relevant to firefighters lifts (as listed in Clause 4) when they are used as intended and under the conditions as foreseen by the installer.
1.6	The following significant hazards are not dealt with in this document and are assumed to be addressed by the building designer:
-	not having enough or correctly located firefighters lifts to move the firefighters up the building;
-	a fire in the firefighters lift well, safe area, machinery space or car;
-	the absence of building floor identification signs at any floor;
-	water management is not operating correctly.

Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 72: Firefighters lifts

Κανόνες ασφαλείας για την κατασκευή και την εγκατάσταση ανελκυστήρων - Ειδικές εφαρμογές για ανελκυστήρες επιβατών και ανελκυστήρες επιβατών και αγαθών - Μέρος 72: Ανελκυστήρες πυροσβεστών

ΕΛΟΤ EN 1838 Ε2

This standard specifies the luminous requirements for emergency escape lighting and standby lighting systems installed in premises or locations where such systems are required. It is principally applicable to locations where the public or workers have access.

Lighting applications - Emergency lighting

Εφαρμογές φωτισμού - Φωτισμός ασφαλείας

ΕΛΟΤ EN 13501-1 Ε3

This document provides the reaction to fire classification procedure for all construction products, including products incorporated within building elements with the exception of power, control and communication cables which are covered by EN 13501-6.
Products are considered in relation to their end use application.
This document applies to three categories, which are treated separately in this document:
-	construction products, excluding floorings and linear pipe thermal insulation products;
-	floorings;
-	linear pipe thermal insulation products.
NOTE	For CE marking of construction products under the Construction Product Regulation ((EC) 305/2011) the NPD option can be used when no reaction of fire performance is to be declared.

Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests

Ταξινόμηση δομικών προϊόντων και στοιχείων σχετικά με την φωτιά - Μέρος 1: Ταξινόμηση με τη βοήθεια δεδομένων από δοκιμές αντίδρασης σε φωτιά

ΕΛΟΤ EN 61009.01/A15

Electrical accessories - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 1: General rules

Ηλεκτρικά εξαρτήματα - Αυτόματοι διακόπτες διαρροής με ενσωματωμένη προστασία από υπερένταση για οικιακή και παρόμοιες χρήσεις (ΑΔΔΥ) – Μέρος 1: Γενικοί κανόνες

ΕΛΟΤ EN 13501-5 Ε2

This European Standard provides the fire performance classification procedures for roofs/roof coverings exposed to external fire based on the four test methods given in CEN/TS 1187:2012 and the relevant extended application rules.
For the classification of a roof/roof covering, only those test methods and those application rules need to be applied for which the corresponding classification is envisaged.
Products are considered in relation to their end use application.
NOTE	The distinction between roofs with a steep slope and facades, in terms of the test and classification standard to be applied, may be subject to national regulations.
General information on the four test methods in CEN/TS 1187 is given in Annex A.

Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests

Ταξινόμηση δομικών προϊόντων και στοιχείων σχετικά με την φωτιά - Μέρος 5: Ταξινόμηση στεγών με χρήση δεδομένων από δοκιμές έκθεσης σε εξωτερική φωτιά

ΕΛΟΤ EN 13501-6+A1

This document provides the reaction to fire classification procedure for electric cables.
NOTE	For the purpose of this document, the term "electric cables" covers all power, control and communication cables, including optical fibre cables.

Fire classification of construction products and building elements - Part 6: Classification using data from reaction to fire tests on power, control and communication cables

Ταξινόμηση συμπεριφοράς  στη φωτιά δομικών προϊόντων και κτιριακών στοιχείων -  Μέρος 6 : Ταξινόμηση  με βάση δεδομένα  από δοκιμές αντίδρασης στη φωτιά καλωδίων ισχύος, ελέγχου και επικοινωνιών

ΕΛΟΤ EN ISO 7010 Ε2

This document prescribes safety signs for the purposes of accident prevention, fire protection, health hazard information and emergency evacuation.
The shape and colour of each safety sign are according to ISO 3864‑1 and the design of the graphical symbols is according to ISO 3864‑3.
This document is applicable to all locations where safety issues related to people need to be addressed. However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic and, in general, to those sectors subject to a regulation which may differ with regard to certain points of this document and of the ISO 3864 series.
This document specifies the safety sign originals that can be scaled for reproduction and application purposes.

Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2019, Corrected version 2020-06)

Γραφικά σύμβολα - Χρώματα και ενδείξεις ασφαλείας - Καταχωρημένες ενδείξεις ασφαλείας

ΕΛΟΤ EN ISO 7010/A1

Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 1 (ISO 7010:2019/Amd 1:2020)

Γραφικά σύμβολα - Χρώματα και ενδείξεις ασφαλείας - Καταχωρημένες ενδείξεις ασφαλείας - Τροποποίηση 1

ΕΛΟΤ EN ISO 7010/A2

Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 2 (ISO 7010:2019/Amd 2:2020)

Γραφικά σύμβολα - Χρώματα και ενδείξεις ασφαλείας - Καταχωρημένες ενδείξεις ασφαλείας - Τροποποίηση 2

ΕΛΟΤ EN ISO 7010/A3

Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 3 (ISO 7010:2019/Amd 3:2021)

Γραφικά σύμβολα - Χρώματα και ενδείξεις ασφαλείας - Καταχωρημένες ενδείξεις ασφαλείας - Τροποποίηση 3

ΕΛΟΤ EN ISO 7010/A4

Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 4 (ISO 7010:2019/Amd 4:2021)

Γραφικά σύμβολα - Χρώματα και ενδείξεις ασφαλείας - Καταχωρημένες ενδείξεις ασφαλείας - Τροποποίηση 4

ΕΛΟΤ EN ISO 7010/A5

Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 5 (ISO 7010:2019/Amd 5:2022)

Γραφικά σύμβολα - Χρώματα και ενδείξεις ασφαλείας - Καταχωρημένες ενδείξεις ασφαλείας - Τροποποίηση 5

ΕΛΟΤ EN ISO 7010/A6

Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 6 (ISO 7010:2019/Amd 6:2022)

Γραφικά σύμβολα - Χρώματα και ενδείξεις ασφαλείας - Καταχωρημένες ενδείξεις ασφαλείας - Τροποποίηση 6

ΕΛΟΤ ISO 23601 Ε2

This document establishes design principles for displayed escape plans that contain information relevant to fire safety, escape, evacuation and rescue of the facility's occupants. These plans may also be used by intervention forces in case of emergency.
These plans are intended to be displayed as signs in public areas and workplaces.
This document is not intended to cover the plans to be used by external safety services nor detailed professional technical drawings for use by specialists.

Safety identification — Escape and evacuation plan signs

Ταυτοποίηση ασφαλείας - Σχέδια και σημάνσεις οδών διαφυγής και εκκένωσης

Requirements for electrical installations

Απαιτήσεις για ηλεκτρικές εγκαταστάσεις

Cutting of trees and shrubs and stump removal

Κοπή και εκρίζωση δέντρων και θάμνων

Pumping stations air vessels

Αεροφυλάκια αντλιοστασίων

Load cells attached on steel support sets

Κυψέλες μέτρησης φορτίου χαλύβδινων πλαισίων

Regulation on Fire Protection of Buildings – Standards referred to PD 41/2018